本吊挂式全自动浮法拉边器(专利号：ZL200420052139.2、ZL200420052140.5、ZL200420077835.9)用于浮法平板玻璃生产，成对布置在锡槽两侧，沿锡槽内玻璃运行方向，以一定间隔设置多对组成拉边器组。本机吊挂在设置于锡槽侧面专用横梁上，在锡槽侧面两立柱间可平行移动，调整布置位置；单台五个自由度运动包含：拉边轮无极调速旋转；拉边杆水平摆动；拉边杆垂直升降运动；拉边轮进出锡槽运动；拉边轮下压、抬起和紧急抬起。

     The suspended automatic top roller (Patent No.:ZL200420052139.2、ZL200420052140.5、ZL200420077835.9) is a necessary device for producing float glass. It is located at two side of tin bath in pairs and combined into the top roller units along running direction of glass ribbon in tin bath. It is hung on special crossbeam, which set at side of tin bath to move horizontally between two buckstay at side of tin bath, and adjust its position. Five freedom operations for single include: adjustable-speed rotation of top roller wheel; horizontal swinging of top roller bar; vertical elevating of top roller bar;top roller wheel getting into and out of tin bath; down-press, lifting and emergency of top roller wheel.

特点：Characteristic

 

◎ 拉边杆与锡槽边封用不锈钢波纹管密封联接；

◎ 拉边杆冷却水设置传感器检测水温，超温报警；

◎ 拉边杆传动齿型带设置断带检测报警传感器，并使该对同时紧急抬起；

◎ 本机选用绝对值编码器检测，运动重复精度高，即使突然断电，来电后记忆当前位置；

◎ 本机三种操作模式：手动操作、随机控制箱操作、控制室远程操作，其中远程分上位机和面板操作；

拉边器组使用：用总线组成网络，远程可对单台、单对、多对分别或同时操作。

Edge sealing between top roller bar and tin bath is done by stainless steel corrugated pipe;

A sensor of cooling water of top roller bar is set for checking water temperature and alarming for overtem perature;

A alarm sensor for checking broken belt is set for drive tooth belt of top roller bar and emergency lifting at same time;

The absolute value coder inspection is selected for this device, repeat accuracy of movement is high, even if power is off, the current position will be memorize after power is on;

Three operation mode: manual operation, control box operation, remote operation in control room, in which, remote operation including computer and panel  operation;

Usage of top roller group: net is composed of the bus; remote  operation is used for single piece, one pair, and multi-pair separately or simultaneously.

主要性能及精度：Main performance and accuracy

 

拉边轮  直径：189mm或214mm   径向跳动：≤0.2mm   

        线速度：60 ~960m/h 或54~1080m/h 

线速度波动： 1/10000

        线速度比：16或20                    

拉边杆水平摆角：      工作范围±16 °，极限±20°，精度0.1°

拉边杆垂直升降行程：  100±0.2mm(工作标高时±50mm)

拉边轮进出锡槽：      3700±0.2mm

Top roller wheel: Diameter:189mm or 214mm

                       Radial jigging: ≤0.2mm

                     Liner speed:60 ~960m/h or 54~1080 m/h

                     Fluctuation of linear speed:1/10000

                     Ratio of linear speed:16 or 20

Horizontal swinging angle of top roller bar: range of operation±16°， linit ±20°， accuracy0.1°

 

Vertical elevating stroke of top roller bar: 100±0.2mm( (working elevation: ±50mm)

Top roller wheel getting into and out of tin bath: 3700±0.2mm

 

主要用户：Main users

     山西利虎玻璃（集团）有限公司Shanxi Lihu Glass (Group) Co., Ltd.

     安徽凤阳玻璃有限公司Anhui Fengyang Glass Co., Ltd.

     成都南玻玻璃有限公司South Glass Group Ltd., Chengdu

     印尼TG-2浮法玻璃生产线Indonesia TG-2 float glass line

     南玻河北浮法玻璃有限公司Indonesia TG-2 float glass line

     信义环保特种玻璃（芜湖）有限公司Xinyi Energy Saving Special Glass (Wuhu) Co., Ltd.